This classic leather bracelet is a sentimental keepsake for any man. It can be personalized with your loved one's actual fingerprints and handwriting.

Chainring measures approximately (46 x 11mm)

How to get your fingerprint:

• To acquire a fingerprint you can either use the traditional ink pad and paper, or scotch tape and pencil methods.(see attached photo instruction)

Step 1: Check that all fingers are clean and dry.

Step 2: Using the pencil, scribble a square a little bigger than the thumbprint. You want to have it nice and dark.

Step 3: Rub your finger on the square until your whole thumbprint is covered in the lead.

Step 4: Stick the sticky side of the sticky tape on the fingerprint and gently pull the tape away.

Step 5: Stick the tape on the piece of white paper. You will be able to see the detail under the sticky tape, please check that you are happy with the prints. Finally, upload a clear image.

• Or use ink, ballpoint pen or pencil to smear on your finger, then press firmly on the white paper, take a photo of the clear fingerprint left on the paper and upload it.

• Messages can be engraved on two sides of the charm with an additional fee.

• Fingerprint jewelry can only be made as good as the fingerprint sample you provide, so be sure to capture a nice clear print. Try a couple times if your first attempt is smudged or too light.